Pinnacle Engineering
10250 M-52
Manchester, MI 48158
Phone: 734-428-7039
Fax: 734-428-7161
|
|
|
Support Arm |
|
Nose |
|
Shaft |
|
Vane |
|
Handle |
|
Hinge Block |
|
Hinge Pin |
|
Gast Model Air Motor |
|
Stud |
|
Socket Set Screw |
|
Studs and Nuts |
|
Socket Head Screw |
|
Roll Pin |
|
Mounting Bracket |
• Simplified design permits easy disassembly and repair.
• Low Cost parts.
• Hinge mounted. Dip into molten metal only when pumping. Ready to pump in less than 60 seconds.
• No lubrication needed.
• Cooling system not required.
• All castings are high temperature KXA alloy for longer furnace life.
• Optional 1 H. P. or 2 H. P. air motor (1 H. P. air motor pumps 970 lbs/min. at 5 ft. head. 2 H. P. air motor pumps 2100 lbs./min. at 5 ft. head.)
• Weighs only 95 pounds.
• Immersible up to 20.18 inches and 31.00 inches.
• Pumps pounds of zinc in one minute with a 72 inch head.
• Easily maneuvered on adjustable hinge mounting with a 31 inch handle.
Description |
Qty |
Part Order Number |
| Model MFC Flow Pump with Gast Air Motor 1 HP | MFC-1HP | |
| Model MFC Flow Pump with Gast Air Motor 2 HP | MFC-2HP | |
| Model MFC Flow Pump without Motor | 1 |
MFC-W/O-Motor |
| Model MFC Short Support Arm with Bushing | 1 |
MFC-5016-W-Bushing |
| Model MFC Short Support Arm without Bushing | 1 |
MFC-5016-W/O-Bushing |
| Model MFC Short Shaft Assembly with Vane and Stud | 1 |
MFC-5018-W-Vane |
| Model MFC Short Shaft Assembly without Vane | 1 |
MFC-5018-W/O-Vane |
| 1 H.P. Air Motor | 1 |
Motor-E-5015-1HP |
| 2 H.P. Air Motor | 1 |
Motor-E-5015-2HP |
| Model MFC-S Flow Pump with special extension with Gast Air Motor 1 HP | 1 |
MFC-S-1HP |
| Model MFC-S Flow Pump with special extension with Gast Air Motor 2 HP | 1 |
MFC-S-2HP |
| MFC-S Pump Assembly without Motor | 1 |
MFC-S-W/O-Motor |
| Long Support Arm with Bushing Replacement for Model MFC-S Pump | 1 |
MFC-S-5016-W-Busing |
| Long Support Arm without Bushing Replacement for MFC-S Pump | 1 |
MFC-S-5016-W/O-Bushing |
| Long Shaft Replacement for Model MFC-S Pump with Vane Assembly | 1 |
MFC-S-5018-W-Vane |
| Long Shaft Replacement for Model MFC-S Pump without Vane Assembly | 1 |
MFC-S-5018-W/O-Vane |
| Hinge Block Assembly with Pin and Handle | 1 |
E-5005-6-7 |
| Bushing | 1 |
E-5025 |
| Cap Screws | 1 |
E-5010-12 |
| Gasket | 1 |
E-5026 |
| Nose with Gasket | 1 |
E-5017 |
| Roll Pin | 1 |
E-5011 |
| Stud | 1 |
E-5020 |
| Stud & Nut Sets | 4 |
E-5024 |
| Vane | 1 |
E-5019 |
| Muffler | 1 |
AC-990 |
| Mounting Bracket (Engineered to Customer's specs) | 1 |
Q-144 |